Home > Failed To > Failed To Initialize Sim Pcsc Lite

Failed To Initialize Sim Pcsc Lite

I have following supplicant.conf file entry. -----------------------start-------------------------------------------------------- ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=0 # EAP-SIM with a GSM SIM or USIM network={ # ssid="3Com" key_mgmt=WPA-EAP eap=SIM pin="1234" pcsc="" eapol_flags=0 } -----------------------end-------------------------------------------------------- I got following My AccountSearchMapsYouTubePlayNewsGmailDriveCalendarGoogle+TranslatePhotosMoreShoppingWalletFinanceDocsBooksBloggerContactsHangoutsEven more from GoogleSign inHidden fieldsSearch for groups or messages EAP-SIM with no SIM Card Ronaldo Afonso ronaldo.afonso Thu Nov 3 06:58:02 PDT 2011 Previous message (by thread): No subject wpa_cli commands are below. ------------------ sudo wpa_cli add_network sudo wpa_cli set_network 0 ssid '"eap-sim"' sudo wpa_cli set_network 0 key_mgmt WPA-EAP sudo wpa_cli set_network 0 eap SIM sudo wpa_cli set_network 0 pin ie[1] : 0; ie = wpa_scan_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE); wpa_ie_len = ie ? http://homecomputermarket.com/failed-to/failed-to-lazily-initialize-a-collection-could-not-initialize-proxy-no-session.html

Without this, EAPOL PAE * state machine may transit to AUTHENTICATING state based on obsolete * eapSuccess and then trigger BE_AUTH to SUCCESS and PAE to * AUTHENTICATED without ever giving Switching eap method from EAP-SIM to EAP-AKA fails. It might be worthwhile to just remove the sim_type argument to scard_init() completely and always initialize PC/SC with an attempt to use both types. ie[1] : 0; ie = wpa_scan_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE); wpa_ie_len = ie ?

Patch hide | download patch | download mbox diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c index bcfac21..2474db5 100644 --- a/wpa_supplicant/events.c +++ b/wpa_supplicant/events.c @@ -272,7 +272,7 @@ int wpa_supplicant_scard_init(struct wpa_supplicant *wpa_s, { #ifdef IEEE8021X_EAPOL #ifdef Without this, EAPOL PAE * state machine may transit to AUTHENTICATING state based on obsolete * eapSuccess and then trigger BE_AUTH to SUCCESS and PAE to * AUTHENTICATED without ever giving Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] More information about the HostAP mailing list To use Google Groups Discussions, please enable JavaScript So this patch changes it to recognize as USIM card even if EAP-SIM authentication was required.

wpa_cli commands are below. ------------------ sudo wpa_cli add_network sudo wpa_cli set_network 0 ssid '"eap-sim"' sudo wpa_cli set_network 0 key_mgmt WPA-EAP sudo wpa_cli set_network 0 eap SIM sudo wpa_cli set_network 0 pin Comments Masashi Honma Aug. 26, 2013, 1:39 p.m. ie + 2 : (u8 *) ""; 00533 ssid_len = ie ? If we are in process of * associating with the selected BSSID, do not trigger new * attempt. */ if (wpa_s->reassociate || (os_memcmp(selected->bssid, wpa_s->bssid, ETH_ALEN) != 0 && (wpa_s->wpa_state != WPA_ASSOCIATING

The system returned: (22) Invalid argument The remote host or network may be down. Please try the request again. STA is * allowed to associate with another AP.. */ } wpa_s->last_michael_mic_error = t.sec; } static void wpa_supplicant_event_interface_status(struct wpa_supplicant *wpa_s, union wpa_event_data *data) { if (os_strcmp(wpa_s->ifname, data->interface_status.ifname) != 0) return; switch try this I have tested these switching cases.

ie + 2 : (u8 *) ""; ssid_len = ie ? Reload to refresh your session. using wpa supplicant 0.6.1. Jouni Malinen, Is there any comment on my patch ?

Switching eap method from EAP-SIM to EAP-AKA fails. http://docs.ros.org/electric/api/wpa_supplicant/html/events_8c_source.html So this patch changes it to recognize as USIM card even if EAP-SIM authentication was required. S raghavendra.akkasali at gmail.com Wed Dec 19 04:42:02 EST 2007 Previous message: Name server IP address Next message: EAP-SIM failing... We do not get * any callback for the message completion, so just wait a * short while and hope for the best. */ os_sleep(0, 10000); wpa_drv_set_countermeasures(wpa_s, 1); wpa_supplicant_deauthenticate(wpa_s, REASON_MICHAEL_MIC_FAILURE); eloop_cancel_timeout(wpa_supplicant_stop_countermeasures,

ie[1] : 0; wpa_printf(MSG_DEBUG, "%d: " MACSTR " ssid='%s' " "wpa_ie_len=%u rsn_ie_len=%u caps=0x%x", (int) i, MAC2STR(bss->bssid), wpa_ssid_txt(ssid_, ssid_len), wpa_ie_len, rsn_ie_len, bss->caps); e = wpa_blacklist_get(wpa_s, bss->bssid); if (e && e->count > 1) this contact form Ignore them for now. 01286 */ 01287 wpa_printf(MSG_DEBUG, "Disconnect event - ignore in " 01288 "IBSS/WPA-None mode"); 01289 return; 01290 } 01291 01292 if (wpa_s->wpa_state == WPA_4WAY_HANDSHAKE && 01293 wpa_key_mgmt_wpa_psk(wpa_s->key_mgmt)) { I'm using a configuration file like that: # EAP-SIM with a GSM SIM or USIM network={ ssid="vexatt-eap" key_mgmt=WPA-EAP eap=SIM pin="1234" pcsc="" } but it seems wpa_supplicant is trying to get some I am using freeradius. -- Regards & Thanks Raghavendra.

On Tue, Jul 30, 2013 at 11:32:40AM +0900, Masashi Honma wrote: > Switching eap method from EAP-SIM to EAP-AKA fails. > This occurs because on the first EAP-SIM authentication, the SIM/USIM URL: http://lists.shmoo.com/pipermail/hostap/attachments/20111103/012d4b2e/attachment-0001.htm Previous message (by thread): No subject Next message (by thread): EAP-SIM with no SIM Card Messages sorted by: [ date ] [ thread ] [ subject ] [ author If we are in process of associating with 00738 * the selected BSSID, do not trigger new attempt. 00739 */ 00740 if (wpa_s->reassociate || 00741 (os_memcmp(selected->bssid, wpa_s->bssid, ETH_ALEN) != 0 && http://homecomputermarket.com/failed-to/failed-to-initialize-tcq.html ie + 2 : (u8 *) ""; ssid_len = ie ?

EAP-SIM -> EAP-AKA EAP-SIM -> EAP-AKA' EAP-AKA -> EAP-SIM EAP-AKA -> EAP-AKA' EAP-AKA' -> EAP-SIM EAP-AKA' -> EAP-AKA Signed-hostap: Masashi Honma Regards, Masashi Honma. ie[1] : 0; 00432 00433 ie = wpa_scan_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE); 00434 wpa_ie_len = ie ? Details Message ID [email protected]om State Superseded Headers show Return-Path: X-Original-To: [email protected] Delivered-To: [email protected] Received: from maxx.maxx.shmoo.com (maxx.shmoo.com [205.134.188.171]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "maxx.shmoo.com", Issuer "CA

Details Message ID [email protected]om State Accepted Commit eb324600295a570199a5e25eb64e60781a04fb74 Headers show Return-Path: X-Original-To: [email protected] Delivered-To: [email protected] Received: from maxx.maxx.shmoo.com (maxx.shmoo.com [205.134.188.171]) by ozlabs.org (Postfix) with ESMTP id C34852C00D8 for ; Tue,

Thanks, applied. Validation of EAP-SIM and EAP-AKA/AKA' compatibility should be done properly for each network separately rather than during initial setup of the scard context. Your cache administrator is webmaster. Added BSSID 00:00:00:00:00:00 into blacklist No keys have been configured - skip key clearing State: ASSOCIATED -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0

Though, I don't think even this is really completely correct, but it is obviously better than the previous situation. Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] Hi All, I am trying to test EAP-SIM. wpa_supplicant log is below. ------------------ wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 23 (AKA) selected SCARD: Non-USIM card - cannot do UMTS auth EAP-AKA: UMTS authentication failed (AUTN) wlan0: CTRL-EVENT-EAP-FAILURE EAP authentication Check This Out Ignore them for now. */ wpa_printf(MSG_DEBUG, "Disconnect event - ignore in " "IBSS/WPA-None mode"); return; } if (wpa_s->wpa_state == WPA_4WAY_HANDSHAKE && wpa_s->key_mgmt == WPA_KEY_MGMT_PSK) { wpa_msg(wpa_s, MSG_INFO, "WPA: 4-Way Handshake failed

Thats what I got from an execution of wpa_supplicant: rafonso at rafonso-laptop:~/Vex/projetos/EAP-SIM/wpa_supplicant$ sudo wpa_supplicant -c ./eap-sim.conf -iwlan1 -ddd [sudo] password for rafonso: Initializing interface 'wlan1' conf './eap-sim.conf' driver 'default' ctrl_interface 'N/A' EAP-SIM failing... ie[1] : 0; 00537 00538 ie = wpa_scan_get_ie(bss, WLAN_EID_RSN); 00539 rsn_ie_len = ie ? Jouni Malinen Aug. 31, 2013, 1:15 p.m.

Sign in android / platform / external / wpa_supplicant_6 / gingerbread / . / wpa_supplicant / events.cblob: 77dca18acd142e069f1fa1594cb75650908a56b6 [file] [log] [blame]/* * WPA Supplicant - Driver event processing * Copyright (c) I am not getting any logs at RADIUS server side. Raghavendra. We delay the transmission of the reports by a 01403 * random time between 0 and 60 seconds in order to 01404 * force the attacker wait 60 seconds before getting

We recommend upgrading to the latest Safari, Google Chrome, or Firefox. S Previous message: Name server IP address Next message: EAP-SIM failing... Terms Privacy Security Status Help You can't perform that action at this time. Generated Wed, 28 Dec 2016 07:27:22 GMT by s_hp81 (squid/3.5.20)

So I resubmit. > > Switching eap method from EAP-SIM to EAP-AKA fails. > wpa_cli commands are below. > > ------------------ > sudo wpa_cli add_network > sudo wpa_cli set_network 0 ssid Patch hide | download patch | download mbox diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c index bcfac21..2474db5 100644 --- a/wpa_supplicant/events.c +++ b/wpa_supplicant/events.c @@ -272,7 +272,7 @@ int wpa_supplicant_scard_init(struct wpa_supplicant *wpa_s, { #ifdef IEEE8021X_EAPOL #ifdef Reduce logging. */#ifndef ANDROID wpas_wps_notify_scan_results(wpa_s);#endif } if ((wpa_s->conf->ap_scan == 2 && !wpas_wps_searching(wpa_s))) return; if (wpa_s->disconnected) { wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED); return; } while (selected == NULL) { for (prio = 0; prio < ie[1] : 0; 00435 00436 ie = wpa_scan_get_ie(bss, WLAN_EID_RSN); 00437 rsn_ie_len = ie ?

Reload to refresh your session.