Failed To Start Scanner Device Busy
On (some) intel chipsets the 'setpci' command can be used to route specific usb ports to either the xHCI or the eHCI controller. jbd 947 03/06/2008 09:22:29 501 Print job has completed. But I'm not able to scan anything. Now as far as I can determine from this cryptic message either the the software is seeing he scanner already on when it isn't or the it is seeing the usb http://homecomputermarket.com/failed-to/virtualbox-failed-to-attach-the-usb-device-busy-with-a-previous-request.html
I may have done it before submitting the bug report, I tried a bunch of stuff before submitting to bugzilla. If possible please updated to the latest hplip and that may resolve this problem. Here's the weird bit: mandrake ONLY recognises there's a scanner there if I first boot into Windows and run the scanner software...... abnordudeApril 1st, 2011, 01:45 AMI tried Xsane. https://bugzilla.redhat.com/show_bug.cgi?id=140248
You are currently viewing LQ as a guest. Visit Jeremy's Blog. Comment 26 Jonathan Eskritt 2004-12-03 09:46:15 EST Created attachment 107830 [details] output from "export SANE_DEBUG_DLL=1 ; export SANE_DEBUG_PLUSTEK=20 ; export SANE_DEBUG_EPSON=5 ; scanimage >output 2>&1" Comment 27 Tim Waugh 2004-12-03 10:29:23 Have changed PC and upgraded OS to Mepis 6.5 but still the same problem with the scanner.
No scanners were identified. OK, found. I did so and Nathan suggested I delete the /tmp/canon.cal file, as this can cause sane to tie up the scanner (or something like that). jbd 923 Question information Language: English Edit question Status: Solved For: HPLIP Edit question Assignee: No assignee Edit question Solved by: Marcel Straub Solved: 2010-09-20 Last query: 2010-09-20 Last reply: 2010-09-20
Whatever, the scanner is now working now that I ran it under Windows :D/> 0 Back to top MultiQuote Reply #10 Pzatch JOAT Group: Members Posts: 675 Joined: 25-November 02 OK, version 2.5.2 installed Checking PyQt version... Firstly you need to put the firmware someplace safe, it is recommended to put it in a subdirectory of /usr/share/sane. find more info I've downloaded the firmware from Henning's SANE page and used MCCto install it. (previously I created adirectory under /usr/shar/sane called gt68xx and copied the file there - this still exists).
You simply need to copy the file into /usr/share/sane/ In my case I got the firmware file from the CD that came with the scanner (if the file is not there, OK, found. Comment 31 Tim Waugh 2004-12-06 12:34:14 EST Great, thanks for testing. Comment 29 Tim Waugh 2004-12-06 07:00:50 EST Since it is a configuration file, it is not overwritten.
Comment 25 Tim Waugh 2004-12-03 05:52:24 EST Let's see what the epson backend is up to. https://lists.opensuse.org/opensuse/2003-03/msg02781.html Comment 22 Jonathan Eskritt 2004-12-01 11:24:50 EST That seems to have done the trick. hplip 03/31/2008 22:20:24 2002 Scan job failed. hplip 03/31/2008 23:02:02 2002 Scan job failed.
To install this dependency, execute this command: sudo apt-get install --yes --force-yes libtool Checking for dependency: libusb - USB library... his comment is here When I start xsane it scans for devices as normal (though it does take a lot longer than usual) and the xsane windows come up as normal. This is a REQUIRED dependency. It creates another error message, but I'll chase that up later, and Nathan thinks that this problem will be fixed in the next release of sane." So thanks to Nathan and
usbview shows the scanner, lsmod shows that scanner is loaded > etc. > > I'm scared this is a sign of poor USB support by the MSI K7N2G nforce2 mobo > you may have epson, epson2 and epkowa enabled at the same time, try leaving only epson or epkowa uncommented) You can also try to comment out "net" driver, if there are Please make sure that this dependency is installed before installing or running HPLIP. this contact form Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
To install this dependency, execute this command: sudo apt-get install --yes --force-yes libsnmp-dev Checking for dependency: libpthread - POSIX threads library... BTW the scan now makes some strange noises at the end of the scan that it didn't before. My Epson Perfection 660 requires firmware to be uploaded at start.
Here 03f0 is the vendorID and 2504 is the productID.
Device URI: cups-pdf:/ PPD: /etc/cups/ppd/PDF.ppd PPD Description: Generic PDF file generator Printer status: printer PDF is idle. A Bruce Dawson (jbd+launchpad) said on 2008-04-01: #2 Aaron Albright wrote: > Your question #28585 on HPLIP changed: > https://answers.launchpad.net/hplip/+question/28585 > > Status: Open => Needs information > > Aaron Albright jbd 948 03/06/2008 09:50:02 500 The printer has started a print job. Reasons why you might get this message: There is a permissions problem.
Please try this: SANE_DEBUG_PLUSTEK=35 scanimage >output 2>&1 and attach the 'output' file. If yours does not, see SANE/Scanner-specific problems for installation instructions. Please make sure that this dependency is installed before installing or running HPLIP. http://homecomputermarket.com/failed-to/failed-to-start-lsb-start-the-kernel-based-nfs-daemon.html Checking for dependency: xsane - Graphical scanner frontend for SANE...
Checking 'pcardext' Photocard extension... Comment 2 Jonathan Eskritt 2004-11-22 11:32:46 EST No, I still get the same error message Comment 3 Tim Waugh 2004-11-22 11:49:41 EST What does: scanimage -L and then: scanimage >/dev/null say? Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted. I have of course been trying to resolve this as it is now the only problem I have on the PC.
Verification Now you can try to see if sane recognizes your scanner $ scanimage -L If that fails, run the command again as root to check for permission problems. hplip 03/31/2008 22:27:45 2002 Scan job failed. The port-number is very # optional and defaults to 1865. # Note that network attached devices are not queried unless configured # in this file. # # Examples: # #net 188.8.131.52 In this case, the solution is to comment out the unwanted backend in /etc/sane.d/dll.conf.
Comment 28 Jonathan Eskritt 2004-12-03 14:14:15 EST I does. I got my Mustek 600 III ep working after a bunch of messing around, and during the process, I received a lot of the same message, and it was due to I got No device available. Microprocessor, Raspberry Pi & Arduino HackerMainframe database troubleshooterMQTT EvangelistTwitter: @DougieLawsonSince 2012: 2B*2, B+, A+, 5Bs, zero, 3BPlease post ALL technical questions on the forum.
If I don't do that I get No scanner found. ??? 0 Back to top MultiQuote Reply #3 zero0w In hard times Group: Members Posts: 864 Joined: 06-October 02 From what I have searched "Device is busy" can be a permissions related issue, so reboot or just log out then log back in and see if it works if not Change the /etc/sane.d/saned.conf file to your liking, for example: # required localhost # allow local subnet 192.168.0.0/24 If you use iptables, insert the nf_conntrack_sane module to let the firewall track saned I ran it as both a regular user and as root.
This is a REQUIRED dependency. Summary of needed commands to run to satisfy missing dependencies: sudo apt-get install --yes --force-yes libcupsys2-dev cupsys-bsd sudo apt-get install --yes --force-yes openssl sudo apt-get install --yes --force-yes libjpeg62-dev sudo apt-get